A bathe arm is one thing that’s hooked up to a rest room bathe system, however nearly each house owner ignores it when planning a transform and regrets it if it is too brief, too skinny, or on the fallacious angle. That is an extension pipe that carries water from the wall outlet to the overhead bathe head, and its form, angle, and measurement decide whether or not the rain bathe head is put in straight above your shoulders or 20 cm behind your head. This information covers all forms of bathe arms utilized in Indian loos, how to decide on the precise size and angle, essential screw sizes, and the value of high quality arms in 2026.
What’s a bathe arm?
A bathe arm is a set or adjustable extension pipe that connects a wall provide outlet to an overhead bathe head. One finish screws into the wall outlet and the opposite finish screws into the bathe head. The arm’s job is to maneuver the bathe head from the wall to straight above the consumer and angle it in order that the spray falls vertically.
Most bathe arms in India join utilizing 1/2 inch BSP screws on every finish. The wall facet connection is screwed right into a provide elbow recessed into the wall. Thread the pinnacle facet connection into the inlet nut of the overhead bathe head. Browse our tub and bathe equipment to see bathe arms alongside matching overhead bathe heads and hid bathe valves.
Kinds of bathe arms
Commonplace fastened arm (S-bend/gooseneck)
The most typical sort of toilet in India. A metallic tube bent into an S-shape or light gooseneck curve that extends ahead and downward from a wall outlet to place the showerhead above the consumer’s head. Lengths vary from 250mm to 400mm. This kind matches most traditional Indian bathe configurations the place the wall provide outlet is shoulder to go top.
ceiling mounted bathe arm
Straight vertical drop arm that connects to a ceiling energy outlet as a substitute of the wall. The arm drops from the ceiling to the extent of the showerhead under, and the highest connection is a 90-degree elbow. Used solely in ceiling-mounted provide piping that’s deliberate earlier than the ceiling is accomplished. The size is 150 mm to 400 mm from ceiling stage.
angle adjustable bathe arm
Ball joint arm with pivot level to regulate showerhead angle after set up. Helpful if the wall provide outlet is at an uncommon top or angle relative to the bathe space, permitting the consumer to orient the pinnacle straight up with out altering the plumbing.
extension bathe arm
A straight tube to increase the attain of an present bathe arm or add size if the usual arm would not enable the pinnacle to succeed in far sufficient above the consumer. They’re sometimes 150 mm to 300 mm lengthy and have screws on every finish.
Slide bar/rail combo with arm
A sliding bar system the place the hand bathe and overhead bathe head are mounted on the identical rail and fed from the identical provide level. In compact loos in India, it’s common to energy each retailers by way of a diverter from a single provide level.
bathe arm comparability
| sort | Finest use | size | mount |
| Commonplace S-bend/gooseneck | Most loos in India | 250～400mm | wall |
| ceiling-mounted | New building with ceiling energy provide | Drop 150-400mm | sealing |
| angle adjustable | Irregular outlet location | 200～350mm | wall |
| extension arm | Add attain to present arm | 150～300mm | wall |
| slide bar combo | Compact rest room, 2 retailers | Fastened with rail | wall |
How to decide on the precise size
The size of the bathe arm determines the place the bathe head is positioned in relation to the consumer. When you get this fallacious, the rain bathe head can hold behind the consumer’s head or sit too near the wall, forcing the consumer to face at a clumsy angle.
Measure the gap from the middle of the wall energy outlet to straight above the place the first consumer will probably be standing. That is the arm attain you want. For the standard Indian rest room with a wall socket roughly 2 meters excessive and a bathe place roughly 300-400 mm from the wall, a normal S-bend arm of 300-350 mm will present ample attain to the middle of the pinnacle.
Earlier than buying, please test the size of your arm by making use of a measuring tape horizontally from the middle of the exit to a standing place. Please add 50mm for the overhang of the bathe head. Please test the peak. For comfy use with out bending over, the underside of the bathe head have to be not less than 200 mm above the tallest consumer’s head.
Screw measurement and compatibility
In India, the usual thread for bathe arm connections is 1/2 inch BSP on each ends. This matches the wall provide outlet and inlet screws on most overhead bathe heads. In case your present fittings are imported or non-standard, please test each connections earlier than buying.
On the arm-to-wall connection, a wall flange plate is used to cowl the hole between the arm pipe and the tile floor. The flange slides over the arm earlier than being screwed on, cosy towards the tile and hiding the availability exit gap. Match the flange end to the bathe arm end and different seen fittings within the bathe space.
Materials and end
Bathe arms in Indian loos should stand up to exhausting water scale on the skin and commonplace water strain inside. Chrome-plated chrome steel our bodies are essentially the most sensible as they’re proof against corrosion, straightforward to descale, and supply a steady end over a few years of use.
Chrome-plated brass our bodies value extra, however present higher corrosion resistance on threaded connections the place dissimilar metallic corrosion can happen over time in exhausting water situations. Black matte and brushed gold finishes can be found for design-forward loos, however would require extra frequent wiping to take care of their look. Match the end of the arm to the bathe head, hid valve trim, and loo faucet fittings in the identical area.
exhausting water upkeep
Limescale builds up on the exterior connection factors and flange plates of the bathe arm. There, the gathered water evaporates after every bathe. Wipe the skin of the arm month-to-month utilizing a moist material and a gentle scale remover. Keep away from abrasive cleaners that may scratch the chrome end and make the floor extra prone to future scale build-up.
Commonplace fastened arms hardly ever block the inner bore, but when your showerhead loses strain after descaling the pinnacle itself, take away the arm and test the inner bore for scale buildup. this Bathroom equipment maintenance guide Cowl descaling all bathe fittings as a part of your annual routine. Getting this proper is a part of the broader case for a loo that works with out friction, and this piece falls into that Daily bathroom health habits Brings helpful perspective.
Bathe Arm Worth Information India 2026
| sort | size | Worth (INR) |
| Commonplace S-bend, ABS, chrome | 250～300mm | ₹300 to ₹1,000 |
| Commonplace S bend, SS, chrome | 300～400mm | ₹800 to ₹2,500 |
| Commonplace S-bend, brass, chrome | 300～400mm | ₹1,500 to ₹4,000 |
| Angle adjustment arm SS | 200～350mm | ₹1,500 to ₹5,000 |
| Ceiling-mounted arm, brass | 150～400mm | ₹2,000 to ₹6,000 |
| lengthy extension arm, brass | 400～600mm | ₹2,500 to ₹8,000 |
Plumber value to switch bathe arm: ₹500 to ₹1,500 (relying on accessibility).
conclusion
Bathe arms are usually not one thing you should buy based mostly on value alone. The proper size will heart the bathe head on you. The proper materials will stand up to Mumbai’s exhausting water with out corroding the threaded connections. Correct ending will keep its look alongside different bathe {hardware}. Salus India’s bathe arm collection covers commonplace S-bend, adjustable and prolonged sorts in SS and brass our bodies to swimsuit Indian set up necessities.
FAQ
Q1. What’s a bathe arm? And what’s its perform?
A bathe arm is an extension pipe that connects the water inlet on the wall to the overhead bathe head, transferring the pinnacle from the wall to a place straight above the consumer. One finish screws into the wall outlet and the opposite finish screws into the bathe head. The size and angle of the arm determines whether or not the bathe head is centered over the consumer’s shoulders or offset to 1 facet.
Q2.What size of bathe arm do I would like?
Measure from the middle of the wall outlet to some extent straight above your standing place and add 50mm for bathe head overhang. In most traditional Indian loos the place the outlet is close to shoulder top, a 300-350 mm arm will enable for correct head positioning. If the usual size doesn’t permit you to attain the standing place, use an extension arm.
Q3.What screw sizes are utilized in bathe arms in India?
Nearly all bathe arms in India use 1/2 inch BSP screws for each the wall outlet connection and the showerhead connection. This is identical commonplace for hand showers, hid valves and most different rest room fixtures in India. In case your present fittings are imported or non-standard, please test compatibility.
This fall. Can I substitute the bathe arm with out calling a plumber?
Sure, for normal wall-mounted arms. Flip off the water provide to the bathe valve or mains, unscrew the outdated arm from the wall outlet by turning it counterclockwise, wrap the PTFE tape across the threads of the brand new arm, and screw the brand new arm clockwise. Reconnect the bathe head. Utilizing fundamental instruments, it takes lower than half-hour.
Q5. Why is water leaking from the wall connection of the bathe arm?
Leaks at wall connections are brought on by worn PTFE tape seals, cracked or corroded threads, or mineral scale that stops a clear seal on the connection floor. Unscrew the arm, clear the threads, wrap it with 2-3 wraps of recent PTFE tape, and reinstall. If the threads in your wall outlet are broken, your plumber might want to substitute the availability elbow behind the tile.
Q6. What’s the distinction between fastened bathe arm and adjustable bathe arm?
The fastened arm has a set S-curve angle that won’t change after set up. The adjustable arm has a ball joint pivot that lets you change the angle of the bathe head after set up, which is helpful in case your wall outlet is at an uncommon top or angle. Though adjustable arms value extra, they resolve positioning issues that fastened arms can’t.
Q7. What’s the value of bathe arm in India in 2026?
The sturdy chrome steel S-bend arm with chrome end is priced between ₹800 and ₹2,500. Brass S-bend arms are priced between ₹1,500 and ₹4,000. The adjustable angle arm is priced between ₹1,500 and ₹5,000. Ceiling mount arms are priced between ₹2,000 and ₹6,000. Set up prices between ₹500 and ₹1,500 for a easy arm substitute.
